Ok so I am redoing a trailer. I have it all sanded and painted. I am trying to remove the keel roller at the very back of the trailer. It is an approx 10" roller/transom saver and it is mounted in welded bracket. On the outside of the bracket on either side there small 1 inch rollers. Here is my problem. I have removed the end caps on the shaft, removed the small rollers, but the large roller in the bracket is still there. Is there a trick to getting the shaft out? I have tried to beat on it with a hammer but the shaft does not budge and the end of the shaft is just starting to mushroom from the hammering. Any suggestions on how to remove the shaft and roller.
Thanks
Thanks