Derek Domino
Cadet
- Joined
- May 6, 2017
- Messages
- 24
Here are my setting options. Hopefully y'all can tell me which one I should be using!
1P1R=1 spark per revolution
2P1R=2 sparks per revolution
3P1R=3 sparks per revolution
4P1R=4 sparks per revolution
6P1R=6 sparks per revolution
3P2R=3 sparks per 2 revolutions
5P2R=5 sparks per 2 revolutions
1P2R=1 spark per 2 revolutions
Since I'm not in the water right now I tested it on idle with the following settings and these are the results. (Drum roll, please.)
1P1R=1 spark per revolution 1870-1920 RPM
2P1R=2 sparks per revolution 1380-1450 RPM
1P2R=1 spark per 2 revolutions 5530-5730 RPM
I could have tested more but I don't trust running it too long out of the water even with the flushing muff. These seem like the likely choices. I'm guessing it's 2P1R since 1P1R gave me the high numbers when I was on the water. 1P2R is even higher, so that leaves 2P1R. Are those numbers close to where I should be at idle? I will test again on the water this weekend.
1P1R=1 spark per revolution
2P1R=2 sparks per revolution
3P1R=3 sparks per revolution
4P1R=4 sparks per revolution
6P1R=6 sparks per revolution
3P2R=3 sparks per 2 revolutions
5P2R=5 sparks per 2 revolutions
1P2R=1 spark per 2 revolutions
Since I'm not in the water right now I tested it on idle with the following settings and these are the results. (Drum roll, please.)
1P1R=1 spark per revolution 1870-1920 RPM
2P1R=2 sparks per revolution 1380-1450 RPM
1P2R=1 spark per 2 revolutions 5530-5730 RPM
I could have tested more but I don't trust running it too long out of the water even with the flushing muff. These seem like the likely choices. I'm guessing it's 2P1R since 1P1R gave me the high numbers when I was on the water. 1P2R is even higher, so that leaves 2P1R. Are those numbers close to where I should be at idle? I will test again on the water this weekend.