Guys
Given the following, what would we imagine I would see of a difference over my 19"p laser 2
With 19"p laser 2 on 18ft 5.0 MPI with a few mods
5100rpm achievable running light
Will average about 60mph or just over on a normal day
1.47:1 ratio Alpha 1
Excellent all round prop.
Now, here is my conundrum...I have tried a 21p laser two, but it may have been worked. On a perfect day she would run high at just about 5000 rpm and about 63/64, but only in ideal conditions and light. More often than not, it wasn't that nice a prop and rpms were lower and lugged a bit. Hence the change to a 19".
With the above in mind and given that the laser 2 is a 13&1/4x21"p.....is the pictured cleaver, at 14x21"p going to be a dog ? Or will it in fact be not as bad as the 21" laser, just because of the design ?
I can get the right hand rotation one for cheap and thinking it might be worth a shot.
What do we think ?
Given the following, what would we imagine I would see of a difference over my 19"p laser 2
With 19"p laser 2 on 18ft 5.0 MPI with a few mods
5100rpm achievable running light
Will average about 60mph or just over on a normal day
1.47:1 ratio Alpha 1
Excellent all round prop.
Now, here is my conundrum...I have tried a 21p laser two, but it may have been worked. On a perfect day she would run high at just about 5000 rpm and about 63/64, but only in ideal conditions and light. More often than not, it wasn't that nice a prop and rpms were lower and lugged a bit. Hence the change to a 19".
With the above in mind and given that the laser 2 is a 13&1/4x21"p.....is the pictured cleaver, at 14x21"p going to be a dog ? Or will it in fact be not as bad as the 21" laser, just because of the design ?
I can get the right hand rotation one for cheap and thinking it might be worth a shot.
What do we think ?