Ted williams 7.5 hp motor prop

CraigH55

Recruit
Joined
May 28, 2016
Messages
1
I need some help attaching my prop on to the out drive on my ted williams motor I recently acquired. I have no clue as to what size the shear pin is or how it stays in. Model # 574-59950
 

steelespike

Supreme Mariner
Joined
Apr 26, 2002
Messages
19,069
Pin for weedless lower is brass factory number77053 may be held in place by a pinned nut 5/32 X 6164, standard pin is Stainless 5/32 x 3/4"
Also may be held in place by a pinned nut.
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
7,985
Don't know about a pinned nut but the rubber prop cone holds the pin in and the prop on.
 
Top