acdc96
Chief Petty Officer
- Joined
- Apr 23, 2013
- Messages
- 412
I'm restoring a 1942 Evinrude Sportsman back to factory condition. I've stripped all the exterior parts down to bare metal (wire Wheel, no chemicals), sanded down all the casting seams, and put a coat of rustoleum etching primer on all parts. I bought Rustoleum High Performace paint that's colored Alumnium. I've used this stuff before on my sterndrive but in flat black with great resulults and adhesion.
Now my question is should I put a coat of regular engine primer over the etching primer before the top coat goes on??
Also, I'm not painting anything on the power head exept for the flywheel. Don't want to screw anything up. But I did clean up the ignition system and rebuilt the carb.
Now my question is should I put a coat of regular engine primer over the etching primer before the top coat goes on??
Also, I'm not painting anything on the power head exept for the flywheel. Don't want to screw anything up. But I did clean up the ignition system and rebuilt the carb.