1960 johnson 40 hp steering question

steurerl

Cadet
Joined
May 28, 2013
Messages
11
I need some help and direction with hooking the steering up for my motor. The boat came with a tele flex cable. I have to ran to the motor but im not sure what i need to hook it up to the motor such as any adapters or parts i need. Any help would be greatly appreciated. This is the last thing i need to do before i get it in the water. Here is a picture of the motor and the cable. I found this part and was wondering if it would work. Teleflex Universal Transom Mount Kit #SA27256P
 

Attachments

  • IMAG0196.jpg
    IMAG0196.jpg
    140.5 KB · Views: 0
  • IMAG0195.jpg
    IMAG0195.jpg
    135.7 KB · Views: 0

Bob_VT

Moderator & Unofficial iBoats Historian
Staff member
Joined
May 19, 2001
Messages
26,019
Re: 1960 johnson 40 hp steering question

well yes it will work however...... you will still need a linkage rod from the newly installed tube for the steering cable and a place to attach it on the motor...... not too hard. I do not have a picture available of an install using the transom bracket kit but someone here might and post it ;)
 
Top