How to remove and change Bilge pump on 89 Bayliner

sdrucker77

Cadet
Joined
Apr 6, 2009
Messages
6
Re: How to remove and change Bilge pump on 89 Bayliner

Do not know what model you have but, there should be an access port in front of the motor.
 

confuzed1134

Cadet
Joined
Feb 18, 2009
Messages
9
Re: How to remove and change Bilge pump on 89 Bayliner

I also wanna know how to go about doing this. On my bayliner capri cuddy which i believe is a 87 or 88. I have an 85 Force outboard motor. There is a little cubby in the back of my boat under where the engine is when raised. My pump makes a sound but doesn't pump out water. Its a real tight squeeze to get under there. I never had to change out the bilge pump, so i was just looking on how to go about doing this and if anyone has done it. Thanks in advance
 

galillo

Seaman Apprentice
Joined
Feb 5, 2009
Messages
31
Re: How to remove and change Bilge pump on 89 Bayliner

I change mine one time my boat is a Baylinner cuddy cabin 1989 with a 125hp force, mine pump has a broken tube end, so I just pull it up form the base and come out. I glue the tube and put it back togheter. I know is really small space but it is possible.
 
Top