Bobcat9957
Recruit
- Joined
- Sep 28, 2014
- Messages
- 3
Hi everyone, new to the site and outboard ownership. I recently purchased a boat with a 2002, 200 Yamaha, 2 cycle, fuel/oil injected motor. All gauges and control are also Yamaha. The boat will sit and idle all day and run to 2000 rpm then stays there. Seems like a regulator of some type is not letting it run over 2k. All gauges are showing no issues. Took temp readings all over with meter and nothing over 150 degrees so I don't see heat as an issue. Oil is full and gas is about half. Any help is appreciated.
Last edited: