pretissimo
Recruit
- Joined
- Aug 21, 2011
- Messages
- 1
i bought this motor and was told it had been sitting for 6 months. I pulled the carb and cleaned it three times, carefully cleaning every orifice. Only thing odd is there is no cap on the pilot jet like shown in the manual. Not sure if all models had this or not. Motor starts quickly on first pull, but will only run at fast idle - (starting position). Try to accelerate and rpm drops and misses, even at WOT. Won't idle slower very well, either. Acts like jetting is not working but I am sure these jets are sparkling clean. Also cleaned float valve and all orifices. Any ideas? pulsar coil? thank you.