Need a yamaha rigging guru !!

[BASSNZEALOT]

Hey guys / gals . -- First post by the newbie . -- Rigged my Basscat for a Yamaha prov 200 which I completely rebuilt . -- De-rigged from Merc. 200 . -- Trying to use analog gauges but am having a hard time getting everything to work right . -- Tach / speedo no problem , but when I hook up the trim gauge my oil injection pump in the remote tank will not function . -- Is there a Yamaha wiring guru in the group ?? -- Any help is greatly appreciated - Thanks , Mark

 

[mark b1924]

Re: Need a yamaha rigging guru !!

hi ,yeah not a problem...the remote tank oil pump is wired to the trim sender unit so pump wont start when engine is tilted & ova flo u thave a faulty trim sender at th outboard.

 

[BASSNZEALOT]

Re: Need a yamaha rigging guru !!

hi ,yeah not a problem...the remote tank oil pump is wired to the trim sender unit so pump wont start when engine is tilted & ova flo u thave a faulty trim sender at th outboard.

I can only hope it's that easy , but the trim sender is just a simple potentiometer which tested good before . -- I'll recheck it tonight to see if it could have gone south on me . -- Thanks for your input . -- What I really NEED is the schematic for the CDI unit . -- If I had that I could get this thing done .