HI, I could use some help removing the powerhead of my 1995 DT8C outboard.
So far removed the carb. oil tank and CDI and the lower unit, and 4 bolts + 2 nuts at the bottum of the upper unit. Tried to remove the powerhead by tapping it with a wooden hammer, but it doesn't come loose. Are there any other bolts to remove I have forgotten about.
So far removed the carb. oil tank and CDI and the lower unit, and 4 bolts + 2 nuts at the bottum of the upper unit. Tried to remove the powerhead by tapping it with a wooden hammer, but it doesn't come loose. Are there any other bolts to remove I have forgotten about.