2005 Yamaha F150 rigging

[boatmanjf]

I am repowering with a pair of 2005 yamaha F150's I need to rigg from engine to dash and binnacle controls. Any one know what all is needed. To my understanding, the harness only has four wires. How do I go about getting all the part numbers and such needed. Local shop said most Yamaha stuff was Month out. I'd like to get all I can online if possible. Thanks for any help.

 

[rodbolt]

Re: 2005 Yamaha F150 rigging

your gonna have to find the rigging guide from 2005-2007.
your going to need 2 trim/warning harness's,2 10 pin main harness's. 2 digital tachs,the dual key switch assy and 1 harness from the key sitch to the tach.
its all plug and play if you get the correct stuff.

 

[99yam40]

Re: 2005 Yamaha F150 rigging

boatmanif you have a PM

 

[boatmanjf]

Re: 2005 Yamaha F150 rigging

Thanks for the help. This is my problem I guess... Motors only seem to have a 4-wire connection going out. I can't seem to find adapters anywhere online. Some forums seem to say the 10-pin harness is not used on the 2005 motors, and tachs. I have the duel key switch. the new multi-tach's.n just don't know which harness to buy for the newer gear. If I get the 10=pin harness's don't I need adapters ? I'm I missing something?