On my left engine, at idle, all exhaust exits through the hub rather than through the above-water exhaust port ... The right engine is fine ...
This follows 3 months of saltwater operation followed by 2 months layup ... I was careful to flush every day .. So corrosion may not be indicated ....
However, clearly the exhaust path is compromised.
Any ideas how to clear it without a teardown?
This follows 3 months of saltwater operation followed by 2 months layup ... I was careful to flush every day .. So corrosion may not be indicated ....
However, clearly the exhaust path is compromised.
Any ideas how to clear it without a teardown?