Rigging up a 2005 Yamaha F90TLR to my 95 Montauk

[WhalerMontauk]

Hello there, I need help rigging up a 2005 F90 four stroke to my 1995 Boston Whaler. Previously I had a 1995 F50 four stroke on there.

So far I got everything installed except for the trim sensor wirings and oil sensor wirings. The wirings from the old controller have 2 plugs.
A. 4 wirings plug (orange, pink, black/white, gray) - Trim
B. 2 wirings plug (green/red, green/white)- oil

I look in the outboard engine and can not find anything that are of that colors. The only plugs that I could find in the outboard that are not connected have the following colors.
A. 4 pins plug (only have 2 wires with color of black and blue)
B. 4 pins plug (pink/black, pink/white, pink, pink/blue)
C. 3 pins plug (white/blue, black/ brown/white)

IF anyone can help me I would greatly appreciate this. I am just about give up and tow it in to the shop. However I figured I am almost done with most of the wirings.

 

[WhalerMontauk]

Re: Rigging up a 2005 Yamaha F90TLR to my 95 Montauk

Alright, I have traced the wires going to the boat and find out that

A. 4 wirings plug (orange, pink, black/white, gray) - Trim gauge
B. 2 wirings plug (green/red, green/white)- oil and temp light

So can anyone tell me what wires in the Yamaha F90TLR four stroke would correlate with these? I don't a factory manual to look up the wire colors of the outboard.