Store Links Mobile - Shop Now

Announcement

Collapse
1 of 2 < >

SITE MAINTENANCE

The iBoats Forums will be down for maintenance starting at 1 PM MST on 12/16/2017. The estimated amount of downtime is 3 hours. Thanks for being a part of the iBoats community!
2 of 2 < >

Help Tip: If you have a question that has not been answered to your satisfaction in the archives, it is always best to start a new thread of your own. By starting your own thread, you will receive the maximum number of views by forum members.

Below are some additional forum policies in hopes of all iboats members will follow, Thank you.

1. Please do not reply to old topics or hijack existing topics. Old topics of a technical nature are like a library book, Please do not write in them.

2. Old topics should be considered archives and used for reference only. Please do not reply to them.

3. Do not take over someone else’s topic (aka hijack) with your own question, even if it is similar. If you have a question that has not been covered to your satisfaction in the archives, it is always best to start a new topic of your own.

4. If you have a question for the original poster (OP) and the topic is over 30 days old, send the OP a PM, he may not even visit the forums any longer, or may not notice your question in the old topic.

5. By starting your own topic, you will receive the maximum number of views by forum helpers that may not even notice your question when it’s posted at the end of someone else’s topic. And those answers will be specific to your particular issue.

6. Please do not post to topics that have been inactive for more than 3 months unless you are the original poster. We have very active forums and any topic that remains inactive for that long should be considered "dead". It is especially confusing when there is an entirely new question posted to an old topic.

7. Posting at the end of any topic is considered to be hijacking the original posters topic which in turn subjects the topic to be closed if it continues to happen thus not making it fair to the original poster in the future had for some reason he/she needed to return for additional information or provide an update of the problem solved which is always welcomed within a reasonable amount of time frame.

8. Please note that you should see a red banner pop up near the bottom of each inactive topic asking you not to reply to old topics. The Red banner will read: Please note this topic has been inactive for 90 days. For the best results, please start a new topic.

Thank you all in advance for doing your part in helping iboats run a smooth ship.

Additional forum rules linked below.
http://forums.iboats.com/forum-rules-guidelines-405/
See more
See less

Torque specs for 1999 OX66 200

Collapse
This topic is closed.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Torque specs for 1999 OX66 200

    Can anyone point in the right direction for torque specs on a 1999 Yamaha 200hp OX66 please? I'm in the middle of a rebuild and can't find them online using general searches. Does anyone know of a place to find them?

    Thanks a million,

    Dave

  • #2
    They are in the applicable Yamaha service manual. Available from any Yamaha dealer or available from Yamaha Technical Publications.

    Comment


    • #3
      hard to believe you are into a rebuild and do not have the service manual with all the info you need

      Comment


      • #4
        Appreciate the condescending help! Useless!

        Comment


        • #5
          What do you need torque spec for exactly? There are a ton of different torque specs on that and every engine. Flywheel? Head bolts? Etc

          Comment


          • #6
            Sign up today
            Since this thread has been judged as providing useless help, it's closed.
            BOAT SPECS FORUM HELP STARCRAFT FORUM SHOP iboats
            Please, no PM's (Private Messages) regarding boat/engine problems.
            That is what the forums are for.
            Only forum/moderator issues will be answered in PM's.

            Comment

            Working...
            X