nsmilligan
Recruit
- Joined
- Apr 30, 2017
- Messages
- 2
My 92 70TLRQ suddenly loss power was working great, stopped to fish on start up engine appeared to be running a little rough, and couldn't get over 3000 rpm.
Did the usual pulled the carbs checked them, set the carb linkage, etc. When I checked the timing, I realized the light was flashing on about 7 ATDC on cyl 2!.
Put the pickup on cyl 2 it was showing the same spot. Changed to cyl 3 and the light flashed about 7 ATDC but cyl 3. Checked the crank sensor it's clean, and tests the right resistance according to the manual. Looks like it may be the CDI computer, anybody got another idea, or seen this before?
Did the usual pulled the carbs checked them, set the carb linkage, etc. When I checked the timing, I realized the light was flashing on about 7 ATDC on cyl 2!.
Put the pickup on cyl 2 it was showing the same spot. Changed to cyl 3 and the light flashed about 7 ATDC but cyl 3. Checked the crank sensor it's clean, and tests the right resistance according to the manual. Looks like it may be the CDI computer, anybody got another idea, or seen this before?