1988 Yamaha carb question

Joynerswf

Recruit
Joined
Apr 22, 2016
Messages
4
I was rebuilding the 3 carbs on my 40hp 2stroke, but I can't fit any of my 10mm sockets onto the main jet, it is so close to the float seat there isn't enough clearance to fit a socket. Is there a special tool for this? A brand of 10mm socket that is unusually thin? It is very frustrating, no way to fit an open ended wrench either
 

Attachments

  • IMG_0877.JPG
    IMG_0877.JPG
    195.8 KB · Views: 0
Top