uptheriverwithoutapaddle
Recruit
- Joined
- Oct 30, 2014
- Messages
- 3
I have done what I think is everything to fix this. I have taken off the heads and all cooling jackets drilling out all the blocked holes etc replaced the poppet valve and associated spring etc. Replaced the water pump impeller. Tested the therostats and heat sensors they all seem to be working fine. I have put a hose on the pipe leading from the water pump up to the motor to see if the water goes up freely and dosent blow the hose off which seemed fine. The heat alarm goes off at about 4200 rpm. After cleaning it out the alarm stops alot quicker than it did so there is much more water flow but it (the alarm) still goes off. Any ideas out there would be greatly appreciated.