Volvo SX drive trim tilt problem

Status
Not open for further replies.

PJFWH170

Cadet
Joined
Sep 16, 2010
Messages
21
My Trim / Tilt pump is intermittent. The plastic connector on the harness going to the pump motor seemed loose so I hard wired it which didn't solve the problem. The relays klick when I toggle the trim button on the throttle but the pump doesn't work. I haven't taken the relays out of the sockets but could corrosion be the cause ? Bad ground ?
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: Volvo SX drive trim tilt problem

Sure corrosion can do it, it could also be a defective relay. Intermittant is a tough thing to troubleshoot, because you have to test while the problem is happening.
 

PJFWH170

Cadet
Joined
Sep 16, 2010
Messages
21
Re: Volvo SX drive trim tilt problem

I haven't pulled the relays to see how the sockets look. Are both relays the same ?
 

Illusive cod

Recruit
Joined
Dec 5, 2017
Messages
1
I had same problem with mine was a loose connection but now having trouble with it not tilting up whilst moving
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Old thread and closed. Start a new thread please.
 
Status
Not open for further replies.
Top