swaping transom shields

candrive55

Petty Officer 2nd Class
Joined
Sep 16, 2010
Messages
116
Hi looking for help yet again.. what does it take to swap a 270/280vp single idle relief transom shield
for a double releif shield. Is it a straight swap?
Thanks
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: swaping transom shields

Shouldn't be a problem at all. The cutout and bolt patterns are identical.
 

flash369

Cadet
Joined
Mar 25, 2011
Messages
15
Volvo Penta Transom Assembly from a 2004 Four Winns Vista

Volvo Penta Transom Assembly from a 2004 Four Winns Vista

$(KGrHqIOKpUE24S3Nw,0BNvyE82US!~~_12.JPG

Don S ! Our veterans Post was donated a 94 28' Four Winns Vista running (2) VOLVO/OMC cobra sx V8's with a close water cooling system We were wondering if we can replace the drives with (2 ) Volvo Penta sx Transom Assembly from a 2004 Four Winns Vista , Will i need to cut the Transom of the 94 four winns , This is a photo of the omc's that 94 omc sx's thatwere on the boat,by the way our drives have no water pump.... it's on the engines and driven by them, thanks jim
boat006.jpg
 

candrive55

Petty Officer 2nd Class
Joined
Sep 16, 2010
Messages
116
Re: swaping transom shields

I think your better off starting a whole new thread....
 
Top