crustysack
Cadet
- Joined
- Sep 21, 2017
- Messages
- 7
need some help here, I ordered a new raw water nipple for my 02 sx-m drive 1.79 serial #4202076669. part # is 3807819 and it is to large, the part # printed on old nipple is 917119. The nut size on the old one is 1 1/8, and the hose size is 1 1/8. the new one is 1 1/4 both sides so there is NO way it will fit thru the transom shield part. If any one can get me a source I would greatly appreciate it, need to go out this weekend. thanks
old one
old and new
and corners of the edges should be square not cut at a 45 degree
old one
old and new
and corners of the edges should be square not cut at a 45 degree
Last edited: