Put in a new element and now gas won't pass through. What am I missing? Help please
A Aengelking Recruit Joined Aug 23, 2013 Messages 3 Aug 23, 2013 #1 Put in a new element and now gas won't pass through. What am I missing? Help please
M MahtyMaht Chief Petty Officer Joined Apr 7, 2010 Messages 605 Aug 24, 2013 #2 Re: Ted williams pump element That element has to be in there with the slot ends pointed at 8 and 2 o'clock
Re: Ted williams pump element That element has to be in there with the slot ends pointed at 8 and 2 o'clock
A Aengelking Recruit Joined Aug 23, 2013 Messages 3 Aug 24, 2013 #3 Re: Ted williams pump element Thanks. I did do that. I have an external tank and my primer ball get to the point where it is rock hard. When I blow on the fuel inlet no air goes through the duck bill.
Re: Ted williams pump element Thanks. I did do that. I have an external tank and my primer ball get to the point where it is rock hard. When I blow on the fuel inlet no air goes through the duck bill.
A Aengelking Recruit Joined Aug 23, 2013 Messages 3 Aug 24, 2013 #4 Re: Ted williams pump element Took the carburetor to my local lawnmower guy and found that the orifice in the bowl nut was clogged. Started it up and she runs smooth
Re: Ted williams pump element Took the carburetor to my local lawnmower guy and found that the orifice in the bowl nut was clogged. Started it up and she runs smooth
M MahtyMaht Chief Petty Officer Joined Apr 7, 2010 Messages 605 Aug 25, 2013 #5 Re: Ted williams pump element Bang! Cool.
