kfa4303
Banned
- Joined
- Sep 17, 2010
- Messages
- 6,094
Hi all. Just wondering if anyone in the forums has, or knows where to find, a float needle seat for a 3 hp air-cooled Gamefisher/Tanaka motor (part #602-20420-200 Seat, Needle). It's essentially just a small brass nipple that threads into the carb body on one end to allow the float needle to seat, while the fuel line from the gas tank connects to the other, barbed end. It's a small little $2 part, but without it, my trusty little motor is a no go. I went to a local small engine shop and they had a very similar carb that would probably bolt right in place, but they wanted $40 for it :/ I'm not sure the motor itself is wort that much, so I thought I'd ask around and see if anyone here had one, or knew where else I might look. Thanks.