• If this is your first visit to the iboats.com Boating Forums, be sure to check out the FAQ. To post a question or comment, begin by signing up. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse

Help Tip: If you have a question that has not been answered to your satisfaction in the archives, it is always best to start a new thread of your own. By starting your own thread, you will receive the maximum number of views by forum members.

Below are some additional forum policies in hopes of all iboats members will follow, Thank you.

1. Please do not reply to old threads or hijack existing threads. Old threads of a technical nature are like a library book, Please do not write in them.

2. Old threads should be considered archives and used for reference only. Please do not reply to them.

3. Do not take over someone elseís thread (aka hijack) with your own question, even if it is similar. If you have a question that has not been covered to your satisfaction in the archives, it is always best to start a new thread of your own.

4. If you have a question for the original poster (OP) and the thread is over 30 days old, send the OP a PM, he may not even visit the forums any longer, or may not notice your question in the old thread.

5. By starting your own thread, you will receive the maximum number of views by forum helpers that may not even notice your question when itís posted at the end of someone elseís thread. And those answers will be specific to your particular issue.

6. Please do not post to threads that have been inactive for more than 3 months unless you are the original poster. We have very active forums and any thread that remains inactive for that long should be considered "dead". It is especially confusing when there is an entirely new question posted to an old thread.

7. Posting at the end of any thread is considered to be hijacking the original posters thread which in turn subjects the thread to be closed if it continues to happen thus not making it fair to the original poster in the future had for some reason he/she needed to return for additional information or provide an update of the problem solved which is always welcomed within a reasonable amount of time frame.

8. Please note that you should see a red banner pop up near the bottom of each inactive thread asking you not to reply to old threads. The Red banner will read: Please note this thread has been inactive for 90 days. For the best results, please start a new thread.

Thank you all in advance for doing your part in helping iboats run a smooth ship.

Additional forum rules linked below.
http://forums.iboats.com/forum-rules-guidelines-405/
See more
See less

Sea King Service Manual I have

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts


  • Sea King Service Manual I have

    I just became the proud owner of sea king SERVICE manuals, not "parts or owners". 3.5-55hp

    If you need me to "quote" any part of them for you please private message me with a valid email

    Pretty nice for doing tune ups, original parts listings, overhauls


  • #2
    Re: Sea King Service Manual I have

    Just the person I need. Can you see about spark plug for a Ski King 10hp
    model no# VMB 52110 serial no#57x20975

    Think the one I had installed was the wrong one.
    Any help would be appreciated.

    Comment



    • #3
      Re: Sea King Service Manual I have

      I have a Sea King 3.5hp model vwb19068b. Can you tell me what spark plug and the gap? Thanks Randy

      Comment



      • #4
        Re: Sea King Service Manual I have

        Originally posted by brian1fuchs View Post
        I just became the proud owner of sea king SERVICE manuals, not "parts or owners". 3.5-55hp

        If you need me to "quote" any part of them for you please private message me with a valid email

        Pretty nice for doing tune ups, original parts listings, overhauls
        Can you tell me the spark plug # and the gape for a 3.5 model vwb 19068b Thanks Randy

        Comment



        • #5
          Re: Sea King Service Manual I have

          Your motor is a 64,65 West Bend built.Became Chrysler in 66 basically unchanged
          up to 77.Aircooled power head and a water cooled exhaust leg.No water pump.
          Plug original number Champion H8J gap .030. Present mumber is likely different
          should be an interchange.

          Comment

          Working...
          X