shermsboat
Recruit
- Joined
- Jul 29, 2015
- Messages
- 1
Working on a 1990 4.3 Yamaha that is hanging going into forward & reverse. Shift cable has been replaced and bronze shifting fork and cam roller assembly 2 years ago for the same problem. Shifted fine up unitl this spring. Boat does not have 50 hours running on it since this was done. Tried the deal with the 2 gaskets, tighened the drive with 2 staggered bolts, 1 top, 1 bottm & dry shifted fine. Tightened all 6 & it hangs up again. Appreciate any tips yall might have.