Help, Mercury 9.9 wont shift into forward gear

Carlylesailor

Recruit
Joined
May 13, 2013
Messages
1
I have a mercury 9.9 2 stroke. I can shift into reverse with the normal "clunk" but shifting into forward I get nothing. Ive checked everything visible under the main cover, all linkages are well. Any ideas on cause or where to start looking?
 

blackhawk180

Petty Officer 1st Class
Joined
Jun 14, 2012
Messages
367
Re: Help, Mercury 9.9 wont shift into forward gear

Without starting the motor, observe the linkage rod from the housing to the lower unit by shifting F and R and check to see it's moving in both directions the same amount. If it is, your problem is probably in the lower unit. I suspect it's only moving the proper amount in one direction. (R)
Let us know what you find out.
 
Top