mercruiser single solenoid trim motor brush kit part number

trhunter

Recruit
Joined
May 11, 2014
Messages
1
Looking for the part number of the trim motor brush kit, should include the end cap also, the trim pump housing is the lower end of the motor. This is in a 1976 Ranger with a 140 hp mercruiser
 

HT32BSX115

Supreme Mariner
Joined
Dec 8, 2005
Messages
10,083
Re: mercruiser single solenoid trim motor brush kit part number

Looking for the part number of the trim motor brush kit, should include the end cap also, the trim pump housing is the lower end of the motor. This is in a 1976 Ranger with a 140 hp mercruiser
Howdy,

Welcome aboard!

You might provide a tad more info like serial number etc (of the engine/drive package if available).......... The boat year/model doesn't really tell us much. Mercruiser parts are looked by serial number ranges and many boat manufacturers used last years model engines and drives etc.

Mercruiser parts does show some info on that stuff that old though.

For future questions, you might have a look at the following link. There's a lot of good info in there!

http://forums.iboats.com/non-repair-i-o-inboards/faq-i-os-461895.html




I also found the following.

http://www.mercruiserparts.com/Show...br=70&bdesc=HYDRAULIC+PUMP+ASSEMBLY,+COMPLETE



Regards,


Rick





 
Top