Truck, Car or Marine Motor Differences

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
40,581
Only need good beer for the first couple pitchers, then we could bring in the cheap stuff, just not rot gut
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Only need good beer for the first couple pitchers, then we could bring in the cheap stuff, just not rot gut

No wonder build quality goes down or many never end! Better ingredients mean better piz......er boats! LOL
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Don't forget about thinking where you're gonna sit to ride this beast! LOL
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
40,581
Don't forget about thinking where you're gonna sit to ride this beast! LOL

What the motor would weigh I think it would take two of them tied together to keep it from sinking, or maybe some extra water wings :)
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
40,581
Hey maybe better yet, install it in my Chrysler with an Aronson drive

Photo687.jpg
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
That's a heavier hull. You'll need a 6-71 and nitrous to get on plane. And a good set of tabs, too. Look out boaters! :eek:
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,297
Hey maybe better yet, install it in my Chrysler with an Aronson drive


Nah.... 12:1 compression 468, cnc ported AFR heads with 4 IDA webers in front of a 2-speed powerglide feeding a Berkley pump....dry headers aimed up and aft....about 120mph with a 100' rooster tail

However I do know where a pair of Arneson 8 drives are cheep
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,297
Tractor pipes go straight up. Jet boat drag headers was what I was thinking
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,297
jet drag headders
61e47420579f3eac1ed022db1ca479f3.jpg


tractor pipes
Tractor%20Pulling%20Header.jpg
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
40,581
I like more of water cooled ones and with a bit of an angle

tractor.jpg
 

WIMUSKY

Moderator
Staff member
Joined
Sep 26, 2009
Messages
19,789
That sounds like the same size as the other guys. I know that slab isn't cheap, at least around here... Very Nice Dodge....
 

bruceb58

Supreme Mariner
Joined
Mar 5, 2006
Messages
30,454
Not many of those around here although I have a friend who has one in Malibu of all places. It's in the back of his property and he just added a full bathroom and bedroom to it in case the wife gets mad at him.
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
40,581
Thanks guys and concrete is around 95 a yard and can get it laid and finished around 0.65 a foot, kind of cheap. I have another barn built two years ago, its 40x64 with 16 foot ceiling and used for storage. Has a 7 to 8 inch slab so I can park my heavy stuff on it along with the boats for the winter
 
Top