Picked this up at an estate sale today and had some questions. I got the it running after cleaning the carbs and it runs pretty smooth. So here is where my newbiesness to this motor comes in
1. The gas tank he gave me with the connector is nothing like I've seen. Weird looking slotted thing that does't really snap on well. So to get things going I used a temp connector. Question is the stock connector does it snap it or just snuggly go onto the nipple?
2. The water flow is neither weak nor very strong. I'd like to change the impeller but the diagrams don't tell me how to drop the lower. I see one nut near the prop but was unable to disengage the bottom. While in there I was going to change the oil too.
Any general tips and tricks would be greatly appreciated. hoping the finally go crabbing this year after my foray with a sears gmae fisher went very bad earlier this year
1. The gas tank he gave me with the connector is nothing like I've seen. Weird looking slotted thing that does't really snap on well. So to get things going I used a temp connector. Question is the stock connector does it snap it or just snuggly go onto the nipple?
2. The water flow is neither weak nor very strong. I'd like to change the impeller but the diagrams don't tell me how to drop the lower. I see one nut near the prop but was unable to disengage the bottom. While in there I was going to change the oil too.
Any general tips and tricks would be greatly appreciated. hoping the finally go crabbing this year after my foray with a sears gmae fisher went very bad earlier this year