What Mercury piston part number IS this?

justchecking

Petty Officer 2nd Class
Joined
Oct 1, 2010
Messages
152
This piston was made in Argentina and is marked "Persan" and "582" and "S" on the inside. It's also stamped HD on the inside. The top of the piston is marked L7,.015,89.175+0.100. The box says "Argentina", 0.015, c5822042. This may not be the original box.

Doing an internet search, this may be the equivalent of a Mercury Part Number 821896A3 0.015 oversize piston.

I'd like to know for sure what it is.

Thanks!
 

Attachments

  • P1.jpg
    P1.jpg
    148.1 KB · Views: 0
  • P2.jpg
    P2.jpg
    138.4 KB · Views: 0
  • P3.jpg
    P3.jpg
    134.4 KB · Views: 0
  • P4.jpg
    P4.jpg
    139.4 KB · Views: 0
  • P5.jpg
    P5.jpg
    120.8 KB · Views: 0

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,589
Re: What Mercury piston part number IS this?

That is a Persan piston made in Argentina, it is also sold under the ProMarine and RedRhino name. It is a very good piston and BRP are using them as a supplier for their motors. Lay a original piston next to this one and all the ports and skirt ports should match if not its wrong...
 

justchecking

Petty Officer 2nd Class
Joined
Oct 1, 2010
Messages
152
Re: What Mercury piston part number IS this?

Ok. Some progress. Markings would indicate:

Red Rhino ME-622 Mercury Cast Pistons 3/4 CYL Big Bore .015, Bottom Guided

What would be the OEM part number equivalent?

I can't find anything on the piston or box that matches a pro marine part number.
 
Top