drews89824
Cadet
- Joined
- May 21, 2012
- Messages
- 6
i need a bit of assistance... i just replaced both my CDI units and on my motor i am not getting spark on cylinders 2 and 5. i tested all the leads coming from my trigger plate to the CDI and read good. i dont however have a peak tester to test my CDI to the coils but i did swap coils around to atleast narrow down a bit. if you have any thoughts please help.
also i did read upwards of almost 16v coming off my stator, dont know if that would affect my 2 no sparks.
also i did read upwards of almost 16v coming off my stator, dont know if that would affect my 2 no sparks.