turbo930ss
Cadet
- Joined
- Aug 21, 2010
- Messages
- 9
Hi
Having a problem with lose of fuel at high rpm. If I pump the primer bult it will run fine.
I had a issue with the mech fuel pump failing and sending rubber into the high pressure fuel injection. Getting stuck in the float valve seat. I have changed the following parts.
1: both fuel filter low and high pressure sides.
2: new fuel lineto engine and check valve on fuel tank.
3: new mech fuel pump.
4: checked for air leaks but can't find any
5: cleaned out the rubber from high pressure fuel injection system.
Thanks
Scott
Having a problem with lose of fuel at high rpm. If I pump the primer bult it will run fine.
I had a issue with the mech fuel pump failing and sending rubber into the high pressure fuel injection. Getting stuck in the float valve seat. I have changed the following parts.
1: both fuel filter low and high pressure sides.
2: new fuel lineto engine and check valve on fuel tank.
3: new mech fuel pump.
4: checked for air leaks but can't find any
5: cleaned out the rubber from high pressure fuel injection system.
Thanks
Scott