how do i remove the larger trim ram

tony11905

Seaman
Joined
Sep 7, 2010
Messages
67
i hope there someone out here that assist me in this, i have a 1985 75hp mercury outboard, and i want to remove the trim ram ,the middle one off of the motor, but the pin that holds the ram to the motor is not moving the rest is already lose it just that pin holding the ram i dont know how to remove.:confused:
 

aussieflash

Lieutenant Junior Grade
Joined
Feb 5, 2011
Messages
1,004
Re: how do i remove the larger trim ram

There is a small cross pin(size of a nail) holding it in.You need to hammer that out with punch tool(if flush).If not flush and protruding you can sometimes yank it out with vice grips/pliers.Then tap out main pin with punch and hammer.
Make sure motor is well supported.
 
Top