1963 Mercury 9.8 Merc 110

slocke

Recruit
Joined
Jul 31, 2006
Messages
5
Does anyone know where I can get a propeller bushing for this model? I have been told that it is discontinued. I would even settle for a new/used propeller.
 

slocke

Recruit
Joined
Jul 31, 2006
Messages
5
Re: 1963 Mercury 9.8 Merc 110

I have tried oldmerc.com, and was not successful. I prefer to get just the bushing because the prop is in good shape. Every prop shop I try tell me it's obsolete so they don't carry it.
 

tmcalavy

Rear Admiral
Joined
Aug 29, 2001
Messages
4,005
Re: 1963 Mercury 9.8 Merc 110

Try the webvertize ads at http://www.aomci.org of one of the sites off their Links page. If the bushing was stock as part of the prop, you may need to spring for a new prop...or watch the auction site for either or both.
 

firefox632

Recruit
Joined
Aug 24, 2007
Messages
5
Re: 1963 Mercury 9.8 Merc 110

go down to king bearing outlet or anyother and they can probable match, also i get my seals there
 

AOMRESP

Seaman
Joined
Aug 30, 2007
Messages
50
Re: 1963 Mercury 9.8 Merc 110

Your old propeller bushing has to be pressed in and any propeller shop should be able to help you
 

Harker

Chief Petty Officer
Joined
Sep 21, 2003
Messages
452
Re: 1963 Mercury 9.8 Merc 110

The 6 spline center is the problem. I think they went to 8 spline in 68 or 69. I found a couple on ebay and bought them because no one else has them.
 

OregonBoater

Recruit
Joined
Feb 22, 2012
Messages
2
Re: 1963 Mercury 9.8 Merc 110

I have this exact make and model: 1963 Merc 110, if you are interested.

Cheers,
Neil

Motor1.jpgMotor2.jpgMotor3.jpg
 
Top