Mercury efi115 2010 oil pressure

JimmyRenken

Recruit
Joined
Aug 16, 2017
Messages
1
Hi! I have a mercury efi115 four stroke from 2010. I have a problem and really need your help. I have talked to every local mercury dealer near gothenburg and got no help what so ever. Everytime i drive the boat 6 beeps comes and engine starts to rattle so i have to lower speed to about 15km/h. Sometimes the beep starts directly when i start the engine. Sometimes after a while when i drive really slow. As soon as i throttle a bit it starts again. So i bought a vesselview module and got a fault message that says low oil pressure.

I have 2 pictures in this mail showing the fault code. I have checked the oil and oil level. It looks perfect both in colour and volume. I have measured the pressure sensor with an ohm meter and it seems ok. I have no idea what else it can be. Can you please guide me?? Really hope to hear from you! Best regards // Jimmy Johansson.
 
Last edited by a moderator:

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,616
Had a similar problem and problem was where harness plugs into ECM...
 
Top