Guys I bought this motor from a dealer a few years ago and am just now getting around to fixing it . It had no switch box when I got it so I have bought and installed a used one taken from a running motor . I got everything hooked up along with new plugs and was kind of surprised to find it had no spark on either plug . I pulled the flywheel to have a looksee and since I have no peak voltage test equipment I used a ohmmeter to check the trigger . I think I may have found the culprit because I get no reading at all across the 2 wires . There is no continuity and it checks open . I haven't checked the charge coils yet but the stator appears to be new . Any thoughts ? Thanks
