1976 (200) 20hp electronic choke?

sahendo

Seaman
Joined
Aug 12, 2013
Messages
54
1976 (200) 20 hp model #1200506E, serial #441xxxx.
I was wondering if anyone had a picture of the linkage and solenoid, so I can see how it operates. The diagrams I found only show manual choke. My motor has the solenoid but no linkage to the choke.

I guess I'm gonna try to make my own if I can get a idea of what I need.
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
You you have the slug that fits inside the choke solenoid? Item #48.

choke.PNG chokearm.PNG
 

sahendo

Seaman
Joined
Aug 12, 2013
Messages
54
No Title

Yes I have the plug and there's a plastic piece that it attaches to on the carb, maybe #49 on the diagram hard to tell from the diagram, but it looks like there's a piece broken off.
 

Attachments

  • photo261451.jpg
    photo261451.jpg
    19.1 KB · Views: 0

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
It does look broken. A whole one looks like this with the part number. Replacements are still available;

chokelever.PNG

Do you still have the manual choke?
 

sahendo

Seaman
Joined
Aug 12, 2013
Messages
54
Yes the manual choke still works, Just trying to get the electric choke working because of where the control box with the key switch is located it's hard to operate both at the same time. And I'm one of those guys who likes everything to work!
 

sahendo

Seaman
Joined
Aug 12, 2013
Messages
54
I've been looking for a diagram or a good picture.
 
Last edited:

sahendo

Seaman
Joined
Aug 12, 2013
Messages
54
Where did you find the diagram? When I look up my model # it only shows the manual choke.
 

sahendo

Seaman
Joined
Aug 12, 2013
Messages
54
I found it, gonna see if I can scrounge up the parts, they say they are NLA
 

sahendo

Seaman
Joined
Aug 12, 2013
Messages
54
Ok I can get the choke lever part# 65108, but I cannot find the the linkage part# 65107. Does anyone have a picture of it on the carb? I wanna see how it actually operates.
 

sahendo

Seaman
Joined
Aug 12, 2013
Messages
54
Ordered the choke lever, part# 65108. I need the linkage part# 65107. If anyone knows where I can get one or has a picture of it so I can try to fabricate one, let me know
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
36,300
I would simply install an electric primer from a Johnson / Evinrude.----------Very good item and used for 30 years on many electric start motors from 10 hp to 300 hp.-------Your local dealer may have used ones.
 

sahendo

Seaman
Joined
Aug 12, 2013
Messages
54
I would still like to see an actual picture of the setup on someone's motor. Somebody has to still have one of these motors with the electric choke setup on it. Anybody?
 
Top