mercruiser 1347-9662 A4 quad linkage question

mojo26

Recruit
Joined
Aug 7, 2013
Messages
3
will attempting to clean up and rebuild the carb on the old boat we just bought (1347-9662 A4) we noticed that on the choke side it seemed that some of the normal linkage you would see on a quad seemed to be missing? normal from a car and other quads i have looked at. does anyone have a picture of what the linkage on this should be? its off the 260 mercruiser and its a 87 model. i took off what was there and never messed with the exisiting linkage and was wondering ifwhen i bought it some of it was gone. boat has ran since ive had it just not to well so were doing the tune-up since the boat had been sitting for a couple of years now.

thanks
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
40,721
Re: mercruiser 1347-9662 A4 quad linkage question

Welcome to the forum

If you can provide a serial number of the engine we will probably be able to help
 

hivoltg

Petty Officer 2nd Class
Joined
Jul 15, 2013
Messages
186
Re: mercruiser 1347-9662 A4 quad linkage question

5.7 BRAVO without high-rise intake 1987 to 1991

1.jpg2.jpg3.jpg

Hope that helps alittle.
 

mojo26

Recruit
Joined
Aug 7, 2013
Messages
3
Re: mercruiser 1347-9662 A4 quad linkage question

id have to go digging around for it. i was just curious as to why it looks so much different and if im missing something off the carb. just wish i had some thing to compare it to is all
 

mojo26

Recruit
Joined
Aug 7, 2013
Messages
3
Re: mercruiser 1347-9662 A4 quad linkage question

that sure looks like mine thanks :)
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
70,513
Re: mercruiser 1347-9662 A4 quad linkage question

id have to go digging around for it. i was just curious as to why it looks so much different and if im missing something off the carb. just wish i had some thing to compare it to is all

Ayuh,.... Welcome Aboard,... There's pictures in the Manuals,...

Which can be found by followin' the links in the Adults Only section, up near the top of this forum,...
 
Top