3.7/470 Mercarb to Rochester swap.

[artificialreef]

Hello Folks. I have a 1983 3.7/470 with a Mercarb 2bbl (one screw adjuster). Was wondering if i can use the Rochester 2 bbl with the 2 screw adjusters or did they have their own intake manifold and linkage configuration?

Thank you.

 

[ericcarr2000]

Re: 3.7/470 Mercarb to Rochester swap.

Hi, I actually swapped over from the single adjustment carb to the dual one and didn't have any problems doing so. As long as the linkage is on the same side of the carb, I believe the linkage should be on the starboard side of the carb.