tuttle593
Cadet
- Joined
- May 29, 2012
- Messages
- 17
looking to swap out my 2 barrel carb for a 4 barrel on my 2003 5.0L murcrusier its a starcraft nexstar 19' boat with 220hp boats rated for 4800 rpm max thats what im at now with a 20p ss prop looking for more power than a 21p ss prop..
heres what i got so far, what about gaskets misic. parts ect..
http://www.summitracing.com/parts/EDL-1409/
http://www.summitracing.com/parts/ED...e|5.0L/305
this company makes a kit not sure if there any good or not?
http://marine-performance-parts.com/hipsbcm.aspx
High Rise Cast Iron Intake
-Brand New Edelbrock Marine 4bbl Carb w/ Electric Choke
-K&N 9x4" Stainless Flame Arrestor w/PCV Tubes
-Intake, Carb, and Thermostat Gaskets
-Carb Mounting Bolts
-Intake Manifold Plugs
-Fuel Line (Mercruiser)
-Throttle Bracket (Mercruiser)
-Electric Choke Power Wire (choke is self grounded)
-RTV Silicone Sealer
heres what i got so far, what about gaskets misic. parts ect..
http://www.summitracing.com/parts/EDL-1409/
http://www.summitracing.com/parts/ED...e|5.0L/305
this company makes a kit not sure if there any good or not?
http://marine-performance-parts.com/hipsbcm.aspx
High Rise Cast Iron Intake
-Brand New Edelbrock Marine 4bbl Carb w/ Electric Choke
-K&N 9x4" Stainless Flame Arrestor w/PCV Tubes
-Intake, Carb, and Thermostat Gaskets
-Carb Mounting Bolts
-Intake Manifold Plugs
-Fuel Line (Mercruiser)
-Throttle Bracket (Mercruiser)
-Electric Choke Power Wire (choke is self grounded)
-RTV Silicone Sealer