JoLin
Vice Admiral
- Joined
- Aug 18, 2007
- Messages
- 5,146
The boat's out of the water and I ran it on muffs to flush out the salt before I drained the blocks. On the older of my 2 motors (2003 Merc Reman), I had to work to clear both block drains, and a lot of rusty water and debris gushed out. Is there a good way to force water (with a garden hose) through the block and try to flush it out? Like, pull the drains and force water through the big (water pump) hose? Just looking for the best method if there is one.
If I can give it a good flushing I'll fill it with the corrosion inhibiting AF.
If I can give it a good flushing I'll fill it with the corrosion inhibiting AF.