kramerpage
Chief Petty Officer
- Joined
- Jul 26, 2010
- Messages
- 447
Can someone tell me where to hook up the two heater core lines to a 4.3L. The hoses are 5/8 inch. I have not purchased any fittings for the motor yet. Thanks
Ayuh,..... There should be a 1/2" pipe plug on the intake manifold, just aft of the t-stat housin',...
That's the hot water feed,....
For a return, there oughta be a 1/2" pipe plug in the circulatin' water pump housin',....