Camshaft upgrade 350 mag mpi

[Trytten]

I was wondering if anyone on here has upgraded their camshaft in their 350 mag mpi I've got a 2006 larson 226 and wanting a little more power and looking in to whipples upgraded ECM and a set of high flow exhaust manifolds looking for a mild cam upgrade nothing to wild

 

[Scott Danforth]

Plenty of cams a little better than the 350 Mag. However if youre looking for more umph, build a 383 stroker

 

[Bondo]

Plenty of cams a little better than the 350 Mag.

Ayuh,.... 'n probably not even worthy of a bigger prop,....

A 383 built with Vortec heads, 'n matchin' pistons, quenched to 'bout .043", will no doubt need a bigger prop,.....

 

[alldodge]

The wipple is the easy way to build power just need to be sure your engine is in good condition, don't do it to a worn engine. Other wise the 383 as mentioned or bore the 350 and increase the compression a bit. The 383 will give you the most without a whipple

 

[Volphin]

Or you could go nuts and do the Whipple WITH a 383. woooooooooooo!

 

[Scott Danforth]

dont forget the cheater NOS fogger system as well.

 

[Trytten]

Yeah 383 would be great but little out of the budget right now I've read that wipple can reprogram the ecm for around 500 bucks to gain a little more power but they can also program for a cam upgrade that's what I was kinda thinking of doing for now I guess thanks for all the help guys

 

[harleyman1975]

Just be aware that once you modify the engine you will have a harder time getting someone to work on it.