renovation
Recruit
- Joined
- Jun 6, 2016
- Messages
- 4
where the fuel line hooks up to the motor . on the motor side is this connector made to be free spinning ? it seems to have very loose connection and last fall at the end of the season.! I was having a problem were we had to have to keep pumping the primer bulb . i have just replaced my fuel line this spring as the line would blacken my hand when i touch it. i found that the connector at the motor were it hooks up seem to spin loosely also that connector had a threaded place in the side were a bolt or set screw would of gone but there nothing in there . thought id ask before we put this pontoon in the water . im unable to see the gas line in the motor were this connector is attached .Ived been unable to fine a good diagram of the motors internal fuel line setup .
Last edited: