toddschubert
Chief Petty Officer
- Joined
- Sep 3, 2011
- Messages
- 504
"99 90hp E90FPLEEC motor has no power past solenoid. No trim but relays buzz no start
A friend brought me his 90 Rude that has been sitting for a year. Attempting to get trim working I'm finding nothing works. On trim the relays buzz a little pressing up and down like not enough voltage but battery is tested good at 12.7 V and strong amps. I have 12V at solenoid but don't know where to look after that.
Can anybody give me a suggestion as to where to look for a problem on this motor?
I'm pretty good on the older models in this size range but not very familiar with this injected 90hp.
A friend brought me his 90 Rude that has been sitting for a year. Attempting to get trim working I'm finding nothing works. On trim the relays buzz a little pressing up and down like not enough voltage but battery is tested good at 12.7 V and strong amps. I have 12V at solenoid but don't know where to look after that.
Can anybody give me a suggestion as to where to look for a problem on this motor?
I'm pretty good on the older models in this size range but not very familiar with this injected 90hp.