johnson 3hp hard to turn right and left

vg569

Cadet
Joined
Jul 7, 2012
Messages
16
HI I have a 1964 johnson 3hp jhl19a I recently bought online. I started checking it out a little today and noticed it's hard to turn one or way or the other. Not the engine turning over, the whole motor turning right and left. Any suggestions?
 

Vic.S

Rear Admiral
Joined
May 4, 2004
Messages
4,699
Have you tied slackening off the friction adjustment screw?


Maybe lubrication of the swivel has been neglected and it is time to take it apart clean it up re-grease and check that the lubricator fitting is clear .
 

F_R

Supreme Mariner
Joined
Jul 7, 2006
Messages
28,195
have to agree with the preceeding reply. Fortunately, that model is easy to take apart to clean the corrosion and/or old caked-up grease out. Simply remove the 8 screws holding the rear half of the swivel, and you will have the whole greasy mess in your hands to examine.
 
Top