1996 Johnson Outboard Trim/Tilt

golbrick7

Seaman Apprentice
Joined
Aug 17, 2010
Messages
42
Own a 1996 Johnson Outboard, model J70TLEU. How do I check and/or fill my Trim/Tilt fluid?
Any help would be appreciated.
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Raise the motor to full tilt position and then fill the reservoir.Cycle it five times up and down and then check it again
 

golbrick7

Seaman Apprentice
Joined
Aug 17, 2010
Messages
42
No Title

Is the attached photo the Trim/Tilt Resavor?
 

Attachments

  • photo215649.jpg
    photo215649.jpg
    175 KB · Views: 0

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
Yes. You can check out the original factory exploded parts diagram for your engine on: epc.brp.com
 

golbrick7

Seaman Apprentice
Joined
Aug 17, 2010
Messages
42
Thanks ever so much for the diagram link, very helpful.
So if I unscrew the cap, which is at the bottom of the resavor, how do I check/fill?
 

Chris1956

Supreme Mariner
Joined
Mar 25, 2004
Messages
27,140
Make sure the boat is level, and fill with Dextron auto trans fluid, until she overflows. I need to use a plier and screwdriver together, to remove the cap.
 
Top