1958 Johnson RDE19C Wiring Harness

[xsdn]

Hello
I got my hands on a RDE19C for free and got it running without the harness, honestly I'd prefer to have the starter do the work than going through manually starting again. I have the solenoid electrical box and whats left of the original cable assembly (It's in bad shape. dry rot, oxidized). Decided to browse the forums in hopes of a replacement but so far the general consensus shows to give up hope on finding a OEM harness plug/cable assembly.
Was going to build my own since I have the appropriate length and gauge available. But I cant seem to find a wiring diagram.
Hopefully someone has some advise, I'd greatly appreciate it.

 

[MH Hawker]

You would do better in the Johnson section

 

[Chris1956]

Look for a wiring diagram on the maxrules web site. It should be real simple. From the solenoid box to the dashboard should be +12VDC, Ground, Ign kill, Solenoid, and electric choke, if you have one. 4 or 5 wires. The orig harness may have had an ammeter wire for the generator(again, if you have one).

 

[F_R]

Here ya go....
http://s19.postimg.org/dv3t0qkxf/Wiring_1958_60_35_40hp_without_generator_kit_fr.jpg

 

[HighTrim]

You can buy them new here

www.nymarine.ca