Throttle/Shift cable mounting to Motor - 1978 35HP 35853R

[NicoPags]

Question regarding mounting the cables to the motor.

I have an 1978 Evinrude 35HP Model No. 35853R.

The remote box and cables that the p.o gave me with it is the Evinrude Simplex 2 Lever P/N 278434.


The cables do have the end connectors, and I have no issue attaching them to the shifter and throttle. My unresolved issue is mounting them to the motor itself. I believe I am missing hardware to do this. Each side of the motor has what looks like a dedicated spot to affix the cable to the motor, Id rather buy OEM parts than "rig" something.

Thanks for all the help in advance

 

[racerone]

Re: Throttle/Shift cable mounting to Motor - 1978 35HP 35853R

Sure, look on -----shop.evinrude.com--------Look for outboard accessories for 1978 and find what you need.-------Don't give up just click away as it is all there.

 

[Daviet]

Re: Throttle/Shift cable mounting to Motor - 1978 35HP 35853R

Take a look at 49,50. See if it helps.
:: iShopMarine.com ::

 

[NicoPags]

Re: Throttle/Shift cable mounting to Motor - 1978 35HP 35853R

Racerone and Daviet,

Greatly appreciated thank you!

 

[Daviet]

Re: Throttle/Shift cable mounting to Motor - 1978 35HP 35853R

Glad we were able to help you out.

 

[NicoPags]

Re: Throttle/Shift cable mounting to Motor - 1978 35HP 35853R

Glad we were able to help you out.

Of course! Thats why you're both the pros.

I supposed I should have been a bit more patient, and followed the diagram more closely. I apologize for flooding the forum with a nonsense post as a result of my own impatience. On a good note, bought a set of two off a fella in minnesota from ebay for $20.00.

Being an advisor in Canada, we have to come up with some knee slapping one liners relative to outdoors, just to connect with new/prospective clients. The branch I work at is located at the mouth of lake Erie. My one-liner, that applies to this thread

"I have very little patience, and I use most of it while fishing".



Thanks again guys