Need help with 69-76 Johnson/Evinrude 18-25 HP Slow Speed Adjustment Linkage Rod

teddytedted

Cadet
Joined
Mar 11, 2011
Messages
17
My father-in-law picked up an old Lund last year that we've been getting ready for the water. It is equipped with a 1973 Johnson 25 HP tiller (model#25R73A) but it is missing the Slow Speed Adjustment Linkage Rod :facepalm:. We fashioned a temporary replacement out of a piece of coat-hanger :lol: but would like to "upgrade" to the real thing.

I've found new replacements online for $40 plus S&H. Ouch. :eek:

So here's what I'm wondering -

* Anybody got a spare they can get rid of? :D Long shot I know, but doesn't hurt to ask!
* I found a place through the Salvage list that says they have a box full of them but would need to know the length to find the right one for me sooooo.. I was hoping someone on here might have the same setup and could put the tape measure to it for me.

Much thanks, any help is appreciated!

http://www.**********/parts/search/BRP/JOHNSON/1973/25R73A/CARBURETOR/parts.html

Part #19 on this parts fiche:

carb fiche.jpg
 

nwcove

Admiral
Joined
May 16, 2011
Messages
6,293
Re: Need help with 69-76 Johnson/Evinrude 18-25 HP Slow Speed Adjustment Linkage Rod

slowspeed link  1974 25.jpg is this what you need measured? its on a 1974 25452m
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: Need help with 69-76 Johnson/Evinrude 18-25 HP Slow Speed Adjustment Linkage Rod

Put both adjustments in a horizontal position and measure the distance between where the rod goes. That's the length you need.
 

teddytedted

Cadet
Joined
Mar 11, 2011
Messages
17
Re: Need help with 69-76 Johnson/Evinrude 18-25 HP Slow Speed Adjustment Linkage Rod

View attachment 222962 is this what you need measured? its on a 1974 25452m

Yeah, that's the one, nwcove!

boobie - I thought of that too & can definitely do that if needed but (to risk sounding like a lazy-***) the boat is about 20 miles away at the FIL's house being stored for the winter. I can run out there and grab the measurement if need be but was hoping to find what I need and get it ordered so we're ready when the ice thaws.

Thanks for the replies guys!
 

nwcove

Admiral
Joined
May 16, 2011
Messages
6,293
Re: Need help with 69-76 Johnson/Evinrude 18-25 HP Slow Speed Adjustment Linkage Rod

the overall length of the one in the pic is 3.423 inches...give or take a few thou. lol but do cross reference to make sure its the same part # from the 1974 25 hp as shown in the pic.
 

teddytedted

Cadet
Joined
Mar 11, 2011
Messages
17
Re: Need help with 69-76 Johnson/Evinrude 18-25 HP Slow Speed Adjustment Linkage Rod

Perfect - thanks a ton nwcove!! Reeeeeeeally appreciate it!
 

nwcove

Admiral
Joined
May 16, 2011
Messages
6,293
Re: Need help with 69-76 Johnson/Evinrude 18-25 HP Slow Speed Adjustment Linkage Rod

no prob ted.
 
Top